Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with






See the difference
Before
After
Before
After
Before
AfterNew Construction in Fresno, CA
New construction roofing in Fresno means installing a roof on a home that’s being built from the ground up, rather than tearing off an old one. For most homeowners here, the cost runs between $12,000 and $28,000 depending on roof size, pitch, and material choice, and it’s a job that has to coordinate with framing crews, inspectors, and a very specific Central Valley building code. When you’re building new in neighborhoods like Woodward Park, Copper River, or the newer developments east of Clovis Avenue, the roof has to handle 110-degree Julys and occasional winter downpours on day one. Birchbark Roofing Fresno handles new construction roofing from the first nail to the final clean-up photograph, and you’ll have a written price before any material gets ordered. Call (559) 785-9461 to talk through your project, or read more about how this fits into our broader Roof Replacement & Installation in Fresno work.
When You Need New Construction
New construction roofing isn’t a repair job. It’s a full installation on a bare deck, and it comes up in a few specific situations. Here’s what sends most Fresno homeowners to us:
- You’re building a custom home. You’ve got a general contractor, a set of plans, and a roof deck that needs underlayment, flashing, and shingles or tile before the drywall goes up. We work with your GC’s schedule and show up with a written scope of work.
- You’re adding a room or a second story. Whether it’s a primary suite addition in Old Fig Garden or a full second floor in the Tower District, the new roof section has to tie into the existing roof without creating a leak point. That transition flashing is where we spend extra care.
- You bought a spec home that came with builder-grade roofing. Some track builders in Fresno install the minimum code-compliant roof to keep costs down. If you’re seeing granule loss within two or three years, you may be replacing a “new” roof far sooner than you should. We can tell you what’s on there and what it’ll take to fix it right.
- Your detached structure needs a roof. A new ADU, a detached garage, a workshop behind the house on a Sunnyside lot. These need the same code-compliant underlayment and ventilation as the main house, and the city of Fresno inspects them just the same.
- Your architect or engineer flagged the roof for upgrade. Fresno’s Title 24 energy requirements and the current California Building Code roof standards are tighter than what many older plans called for. If your plans were drawn five years ago and you’re building now, you may need a different roof assembly than originally specified.
Our New Construction Process
New construction has a different rhythm than a tear-off. The roof goes on before the interior is finished, which means the sequencing matters to everyone else on site. Here’s how we work it:
- Plans and deck inspection. We start with your architectural drawings and a visit to the bare roof deck. We check the sheathing thickness, the truss spacing, and the venting plan. If something doesn’t match the drawings, we flag it before any material arrives.
- Written price and material selection. You choose from materials by GAF, CertainTeed, and Boral (we work with them all), and we put the full price in writing in dollars before anything gets ordered. No allowances, no “we’ll see how it goes.” You’ll know what you’re paying.
- Underlayment and flashing. In Fresno, the underlayment matters as much as the shingles. We use a full synthetic underlayment and detail every penetration: plumbing vents, furnace flues, skylight curbs, and the chimney if there is one. Flashing goes in before shingles, never after.
- Shingle or tile installation per manufacturer spec. Every manufacturer has a specific nail pattern and exposure. We follow it exactly, because that’s what keeps the warranty valid. In a Fresno summer, a shortcut on nail placement shows up as a blow-off in the first big wind event.
- Inspection coordination and final walk-through. Fresno requires a roof inspection before the building can be closed in. We’re on site for it, and if the inspector flags anything, we address it that week. After the job is done, you get a photo of the completed roof and the clean-up before the crew rolls out.
New Construction Pricing in Fresno
What you’ll pay for a new construction roof in Fresno depends mostly on the size of the roof, the pitch, and the material you choose. A 1,800-square-foot single-story house with an architectural shingle roof from GAF or CertainTeed typically runs between $13,000 and $19,000. The same house with a concrete tile roof from Boral will be closer to $24,000 to $32,000, and a standing seam metal roof usually starts around $28,000. Steep pitches add labor cost because the crew moves slower and needs more safety equipment. Complex hips, valleys, and dormers add time and flashing detail. None of this shows up as a surprise on your invoice, because our price is always written before the work starts.
Here’s the shape of it:
- Architectural shingle roof, simple gable, 1,800 sq ft: $13,000 – $19,000
- Concrete tile roof, same footprint: $24,000 – $32,000
- Standing seam metal, same footprint: $28,000 – $38,000
- Detached garage or ADU roof, shingle: $6,000 – $11,000
- Cold roof assembly upgrade (required for some Title 24 designs): add $1,500 – $3,500
If you’re pricing out a new build, call (559) 785-9461 and we’ll give you a number to work with. Estimates are free, and you’ll see the exact written price before any work starts.
Why Fresno’s Climate Changes How We Build
Fresno gets 266 sunny days a year and temperatures that hover above 100 degrees for weeks at a stretch in July and August. That heat does specific things to roofing materials. Asphalt shingles cure faster and can become brittle if they’re not rated for the climate. Concrete tile holds up well but needs a specific underlayment spec to handle the thermal expansion. We build for this specific heat load, and we also build for the winter inversion layer. In neighborhoods like Fig Garden and Huntington Boulevard, winter mornings can bring heavy fog and condensation that sits on the roof for hours. The underlayment has to be a true moisture barrier, not just a felt paper. We specify accordingly, and we explain the reasoning in the written proposal.
What New Construction Means for Your Family
When you’re building a new home, the roof is usually one of the first things to go on. Your kids aren’t sleeping under it yet, but they will be. That’s why we use the same care promise on a new construction roof that we use on a lived-in home. Shoe covers don’t matter as much on a bare subfloor, but the clean-up still does. A new construction site is busy, and debris from one trade slows down every other trade. We clean the roof deck area every day, and we photograph the finished clean-up before we leave. If your builder has a pet on site, we coordinate the gate schedule. We know it sounds like a small thing. It’s not.
FAQs – New Construction
How much does new construction roofing cost in Fresno?
New construction roofing in Fresno costs between $13,000 and $38,000 for most homes, depending on roof size, pitch, and the material you choose. Architectural shingles from GAF or CertainTeed are the most affordable path, and concrete tile from Boral or standing seam metal run higher. Your exact price gets written down before we start, so you’ll never get a surprise on the back end. Call (559) 785-9461 for a free estimate on your specific plans.
Can Birchbark start on my new construction roof right away?
Yes. New construction jobs usually start within one to two weeks of the signed proposal, depending on where your framing crew is in the schedule and whether the roof deck is ready for underlayment. If the building department has a scheduled inspection date, we’ll work around it. Call us and we’ll slot your project in.
Do you work with our general contractor, or do we coordinate separately?
We work with your general contractor, your architect, and your homeowner’s schedule at the same time. The roof has to integrate with the framing, the HVAC penetrations, and the solar racking if you’re planning it. We’ll coordinate directly with your GC on sequencing, but the written price and the guarantee are with you, the homeowner.
What materials do you use for new construction in Fresno?
We install new construction roofs from GAF, CertainTeed, and Boral, among others. The climate here pushes us toward materials with high heat ratings and solid manufacturer warranties. If you’re deciding between shingles and tile, we’ll show you the cost difference in writing and explain how each one performs in a Central Valley summer. Estimates are free, and there’s no obligation.
Get a Written Price Before You Build
New construction moves fast, and the roof is one piece of a much bigger puzzle. When you’re ready to lock in the roofing scope, call Birchbark Roofing Fresno at (559) 785-9461. You’ll get a live person, not a voicemail tree, and you’ll get a written price in dollars before any material goes on the truck. From tear-off to clean-up photograph, every step gets documented, and the 365-Day Done Right Promise applies here just like it does on every roof we install.
Written by Erik Lindgren, Owner at Birchbark Roofing Fresno, serving Fresno.